Wall Installation
1
Remove the bracket by sliding it downward from the unit.
2
Hold the flat edge of the bracket against the wall with the
rubber feet towards the bottom of the unit.
Mark the location of
the two mounting screw holes with a pencil.
3
Thread the power cord through the square hole at the bottom
center of the bracket.
4
Hold the bracket against the wall with the power cord and the
two telephone cords routed through the channel on the back
top center of the bracket (use only one line cord if you’re not
connecting a phone).
Only the telephone line cord(s) should be routed
through the bottom of the bracket channel. Using the appropriate wall
screw for your wall type, screw the bracket into the wall.
Power Cord
Power Cord
Telephone
Line Cords
Telephone
Line Cords
3
F.P.O.
NEED 436 MODEL
