Page 8
Operational Instructions
Charging
- Charge your LoudSpeak’r through any USB jack or wall charger.
- The LED indicator will begin to blink blue.
- Full charge time is two hours and the LED indicator will stop
blinking.
Power Up
- Slide the switch on the back of the speaker to the ON position.
- Press and hold the until the front LED indicator turns on blue.
- To power down your speaker, hold down the button until the
speaker says “Goodbye”
- On the back of the speaker, slide the main power switch to the
OFF position to prevent accidental button presses.
Using the Audio Line in Connection (aux-input)
To playback your music via the AUX-IN port, plug a standard stereo
headphone cable (3.5 mm) from your audio device to LoudSpeak’r
and begin playback on your audio device.