
58
Make or Answer a Call
continued from page 57
Speakerphone
To make a call,
press and release the desired LINE
button or
K
. The SPEAKER light goes on. Wait
for a dial tone, then dial the call. Press
K
to end
the call.
To answer a call,
press
K
or press the LINE
button of the incoming call. Press
K
again to
end the call.
NOTE:
If headset is programmed as the default mode
(see “Set Automatic Mode” on page 41), you must
pres
s
K
to activate the speakerphone.
Headset
You can use this phone hands-free when you install any
industry standard two-band 2.5mm headset (purchased
separately). For best results use an AT&T two-band
2.5mm headset.
Make sure the headset is plugged into the headset jack.
You will hear a double-beep if you press
h
when
the headset is not plugged in.
NOTE:
If headset is programmed as the default mode,
(see “Set Automatic Mode” on page 41) but the
headset is not plugged in, the phone will switch to
speakerphone.
To make a call,
press and release
h
or press
the desired LINE button and then press
h
.
The HEADSET light goes on. Wait for a dial tone,
then dial the call. Press
h
to end the call.
To answer a call,
press
h
. Press
h
again to end the call.
NOTE:
If speakerphone is programmed as the default
mode (See “Set Automatic Mode” on page 41), you
must press
h
to activate the headset.
TELEPHONE OPERA
TION
TELEPHONE OPERA
TION
❖
❖
❖
❖
❖
M
M
M
M
MM
M
M
M
MM
M
M
M
MM
M
M
M
M
❖
❖
❖
❖
❖
M
M
M
M
MM
M
M
M
MM
M
M
M
MM
M
M
M
M