![AT&T 80-5973-00 - E2812B - 2.4 GHz Digital Cordless Dual Handset Phone Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/atandt/80-5973-00-e2812b-2-4-ghz-digital-cordless-dual-handset-phone/80-5973-00-e2812b-2-4-ghz-digital-cordless-dual-handset-phone_user-manual_2993949024.webp)
21
Telephone operation
Handset settings
To cancel an operation, back up to the previ-
ous menu, or exit the menu display press
OFF/
CLEAR
. To return to the idle mode press and
hold
OFF/
CLEAR
.
Dial type
In this menu, you can choose
TONE
or
PULSE
(rotary) dialing. The factory default setting is
TONE
.
Change this to
PULSE
only if you do not have
touch-tone dialing service.
1. Press
MENU/
SELECT
in idle mode to enter the
feature menu.
2. Use the
CID/-VOLUME
or
DIR /
to scroll
to the
DIAL TYPE
menu, press
MENU
/SELECT
to
enter the menu when it is highlighted with a
>
symbol.
3. Press the
CID/-VOLUME
or
DIR /
to
select
TONE
or
PULSE
.
4. Press
MENU
/SELECT
to save your preference and
be returned to the feature menu.
NOTE:
If you have more than one handset registered, dial
type change made on any one handset will apply to all.
Temporary ring silencing
Press
OFF/
CLEAR
or
MUTE/
DELETE
while the tel-
ephone is ringing to silence the ringer temporarily.
This will silence the ringer without disconnecting
the call. The next incoming call will ring normally
at the pre-set volume.
NOTE:
If there is more than one handset in use, all hand-
sets ring with an incoming call except those with the vol-
ume turned off. Press
OFF/
CLEAR
or
MUTE/
DELETE
on
one handset will only silence the ringer of that particular
handset but the other handset(s) will continue to ring.
DIAL TYPE: TONE
>
DIRECTORY
>
DIAL TYPE