54
ANSWERING SY
STEM OPERA
TION
Feature summary
Default settings indicated by
*
.
SYSTEM ANNOUNCES:
DESCRIPTION/DIRECTIONS:
“Change remote access code”
Set the remote access code you
50
*
will use to access features and
functions of the answering system
from a touch tone phone. The code
can be changed to any two-digit
number from 40--99.
dfggdggdfgg
NOTE:
You can press and hold
c
to advance the remote access
code by tens.
“Change message alert”
When Message Alert is turned on, Off
*
the base beeps once every 10
On
seconds when new messages have
been received.
“Change announce only”
When you turn Announce Only on,
Off
*
callers hear your announcement,
On
but cannot leave a message.
“Change call screening”
When you turn Call Screening off,
On
*
you will not hear incoming messages
Off
as the caller leaves them.
“Change number of rings”
Choose how many times the phone
2
will ring before the system answers
4
*
a call. With Toll Saver active, the
6
system answers after two rings
Toll Saver
when you have new messages and
after four rings when you have no
new messages.
NOTE:
Exit Feature Setup at any time by pressing a PLAY/STOP
button.
ANSWERING SY
STEM OPERA
TION
91-5431-10-00_ATT5870_R0JUN040 2/5/03 4:03 PM Page 53
