2
Feature Setup
1
To enter Feature Setup mode, press and
hold
S
until the system announces
“N
UMBER OF RINGS IS
…”
2
Press and release
S
until the
system announces the feature you
want to set.
3
Press and release
a
or
r
until the system
announces the setting you want.
Refer to the Feature Summary
for options.
4
Press and release
S
to set
up the next feature listed on the
Feature Summary
— OR —
Press and release
P
to
exit Feature Setup.
The new settings will be saved.
5
After you have selected the feature
options, you can review the settings
by pressing and releasing
S
.
FEATURE SETUP
When any feature is on, the Message Window displays
When any feature is off, the Message Window displays
Feature Summary
FEATURE:
SYSTEM
OPTIONS:
ANNOUNCES:
RING SELECT
“N
UMBER OF
Choose how many times the line will
RINGS IS
...”
ring before the system answers a call.
• Set for 2 to 7 rings, or choose
Toll Saver 2/4 or Toll Saver 4/6.
• When set to Toll Saver 2/4, the system
answers after four rings when you have
no new messages and after two rings
when you do. Toll Saver 4/6 causes the
system to answer after six rings when
you have no new messages and after
four rings when you do.
• During setup, the Message Window will
display the number of rings, (
8
for Toll
Saver 2/4, or
9
for Toll Saver 4/6).
REMOTE
“R
EMOTE ACCESS
Change the Remote Access Code to
ACCESS CODE
CODE IS
...”
any three-digit number from 500 to 999.
• The Remote Access Code, preset to 500,
allows you to access many features of this
answering system remotely from a touch
tone phone.
• The system will prompt you to repeat
Steps 2
and
3
of Feature Setup until
you have set all three digits.
