Atak AXS2040, Руководство по установке

Страница: 7 / 12

7/32"
(5.5mm)
Go to Step 3 on PAGE 8.
O
Center line
2.5"(64mm)
CAUTION:
To avoid potential personal injury or property damage:
Both lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the Bolt Head Must Face UP at this step!!
No!
Wall plate
Bolt Head UP!
Wall plate
Use a pencil to mark the center
of the stud.
Use a pencil to mark the mounting holes on the
wall. Make sure the holes will be in the center
of the stud.
Use 5/32” (4mm) drill bit to pre-drill holes
at least 2.5” inches (64mm) deep at the
marked locations.
Use the lag bolts (1) and washers (2) to secure
the Wall Plate to the wall.