CHARGING THE BATTERY
Before using the
A5BS
, fully charge the speaker by
plugging the Micro USB end of the supplied USB cable
into the
MICRO USB PORT
on the rear of the speaker.
Then plug the Standard USB end into a USB port on a
computer or USB wall charger.
•
The
LED INDICATOR
on the speaker will turn
RED when the speaker is charging
•
The
LED INDICATOR
will turn OFF when the
speaker is fully charged.
PAIRING TO A BLUETOOTH DEVICE
1.
Turn your Bluetooth device
OFF
entirely and then turn it back
ON
to refresh the device’s
Bluetooth memory.
2.
Find the Bluetooth menu in your device and make sure the Bluetooth function is turned
ON
(refer to your device’s user manual for instructions on finding the Bluetooth menu).
3.
Turn the
A5BS
ON
using the
ON / OFF SWITCH
. The
LED INDICATOR
will blink BLUE
about 2 times per second, indicating the speaker is ready to be paired.
4.
On your device, perform a Bluetooth “device discovery” to add the
A5BS
as a new device.
5.
When the speaker is discovered your device will display “
A5BS
” in the Bluetooth menu.
6.
If your Bluetooth device asks for a password, enter “0000” and the device will now pair with
the speaker and be ready to use.
•
NOTE:
The
LED INDICATOR
will flash BLUE about once every 3 seconds when the
speaker has successfully paired with your device.
7.
If supported by your device’s menu, set the A5BS as “set as authorized” or “add to trusted
devices”.
•
NOTE:
Keep the Bluetooth function on your device
ON
, to insure the speaker can
automatically pair with your device the next time the speaker is turned
ON
.
PLAYING MUSIC
After successfully pairing the speaker with your Bluetooth device, you can begin playing music
simply by choosing the song you wish to hear on your device’s menu system (refer to your
device’s user manual for instructions on playing music).
All Volume & Playback controls (Play, Pause, Skip + / -, etc.) are controlled directly on your
Bluetooth device.
USING NON-BLUETOOTH DEVICES
If you wish to use a device that does not have Bluetooth functionality with the
A5BS
, simply
connect one end of the supplied 3.5mm Audio Cable into the Headphone Jack of your device and
the other end into the
3.5mm AUDIO INPUT
on the
A5BS
.
NOTE:
When using the
3.5mm AUDIO INPUT
the Bluetooth functions of the
A5BS
are not
available and the
LED INDICATOR
will turn OFF. To resume Bluetooth operations simply unplug
the cable from the
3.5mm AUDIO INPUT
and the
A5BS
will automatically re-pair with your
Bluetooth device.
ON / OFF
SWITCH
LED
INDICATOR
MICRO USB
PORT
3.5mm
AUDIO
INPUT
A5BS BLUETOOTH SPEAKER
INSTRUCTION MANUAL
