ATAG
49
To reset the correct time of day:
1.
Press button
SELECT
repeatedly to select
the “Time of day” function. The relevant pilot lamp
will start flashing. Then proceed as described above.
The time of day can only be reset if no automatic
function (cooking duration
or end of cooking
) has been set.
“Cooking Duration” function
This function allows the oven to automatically
switch off at the end of a programmed cooking
duration time. Place food in the oven, select a
cooking function and adjust the cooking tempera-
ture.
Press button
SELECT
repeatedly to select the
“Cooking Duration” function. The relevant pilot
lamp
will start flashing. Then, proceed as
follows:
To set the cooking duration time:
1.
Press button “ ” or “ ”.
2.
After the setting is carried out, wait for 5
seconds: the "Cooking Duration" pilot lamp
will
come on and the display will revert to the time of
day.
3.
When cooking time is over, the oven will
be switched off automatically and an acoustic alarm
will be heard, while the pilot lamp will start flashing.
Turn the oven function and the thermostat control
knob to zero.
To switch off the acoustic alarm, press any button.
NOTE:
turning the acoustic alarm off will reset the
oven to manual, and if the oven function and the
thermostat knobs are not set to zero the oven will
start to heat again.
To cancel the cooking duration time:
1.
Press button
SELECT
repeatedly to select
the “Cooking Duration” function. The relevant pilot
lamp
will flash and the display will show the
remaining cooking time.