![Atag KF8178ADR/A01 Скачать руководство пользователя страница 23](http://html.mh-extra.com/html/atag/kf8178adr-a01/kf8178adr-a01_user-manual_2995638023.webp)
Problem
Possible cause
Solution
The compressor does
not start immediately af-
ter pressing the Intensive
Cooling touch, or after
changing the tempera-
ture.
This is normal, no error has oc-
curred.
The compressor starts after a pe-
riod of time.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the
rear plate.
This is correct.
Water flows into the re-
frigerator.
The water outlet is clogged.
Clean the water outlet.
Products prevent that water
flows into the water collector.
Make sure that products do not
touch the rear plate.
Temperature cannot be
set .
Shopping function switched on.
Switch off Shopping manually, or
wait to set the temperature until
the function has reset automati-
cally. Refer to ShoppingMode .
The temperature in the
appliance is too low/
high.
Many products are stored at the
same time.
Store less products at the same
time.
The temperature in the
refrigerator is too high.
There is no cold air circulation in
the appliance.
Make sure that there is cold air
circulation in the appliance.
Upper or lower square is
shown in the tempera-
ture display.
An error has occurred in meas-
uring the temperature.
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
DEMO appears on the
Display.
The appliance is in demonstra-
tion mode (DEMO).
Keep pressed approximately 10
sec. the Mode button since a long
sound of buzzer is heard and the
Display shut off for a short while:
appliance start works regularly.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the light-
ing device. Contact your Service Center .
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective door
gaskets. Contact the Service Center.
INSTALLATION
Positioning
Warning!
If you are discarding an old
appliance that has a lock or catch on
the door, you must ensure that it is
made unusable to prevent young
children being trapped inside.
Important!
The appliance shall have the
plug accessible after installation.
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
23