Atag ES10 MG, Инструкция по эксплуатации

Страница: 15 / 40

‘P’ is shown on the display. Touch the timer key to enable 'Pairing mode'. The Wi-Fi symbol will flash.
This mode will be disabled automatically after 3 minutes.
On the ConnectLife-app, use the 'Pairing' or 'Discovery' option of the ConnectLife app to pair another
user.
Remote control mode
To change function settings remotely, the appliance must be switched on, and the ConnectLife-app
must be enabled.
‘c’ is shown on the display. Remote control mode is only available if the Wi-Fi connectivity setup has
been performed. Touch the timer key to enable 'Remote control'.
Blinking ‘c’: Remote control is enabled.
Static ‘c’: Remote control is disabled.
To close the Wi-Fi menu, touch and hold the – (minus) key for 3 seconds. If no key is touched within
10 minutes, the Wi-Fi menu will be switched off automatically; the hood will be back in standby mode.
Wi-Fi menu
To access the Wi-Fi menu, the hood must be on standby. Touch and hold simultaneously the – (minus)
key and timer key for 3 seconds. Depending on the Wi-Fi state, there are 1 to 3 options available in
the menu: ‘C’, ‘P’, and ‘c’. If more than 1 option is available, then use the + (plus) and – (minus) keys
to toggle between the options. Confirm the selected option by touching the timer key.
Switching on Wi-Fi:
• The hood must be switched off.
• Touch and hold simultaneously the – (minus) and timer key for 3 seconds to enter the Wi-Fi
menu. The ‘Light' icon will be turned off.
• Touch and hold simultaneously the – (minus) and timer key for 3 seconds to turn on Wi-Fi. ‘o’
will blink 3 times. Wi-Fi symbol will blink.
Switching off Wi-Fi:
• The hood must be switched off.
• Touch and hold simultaneously the – (minus) and timer key for 3 seconds to enter the Wi-Fi
menu. The ‘Light' icon will be turned off.
• Touch and hold simultaneously the – (minus) and timer key for 3 seconds to turn off Wi-Fi. ‘o’
will be static enlightened. The Wi-Fi symbol will turn off.
Displaying the Wi-Fi status:
• Wi-Fi module disabled: Wi-Fi symbol not displayed.
• Configuration in progress: Wi-Fi symbol flashes.
• Connected to home network router: Wi-Fi symbol flashes.
• Connected to home network router and cloud: Wi-Fi symbol continuously lit.
15
Wi-Fi-connectivity