3
Auto-Lock Installation Instructions
ata
Preparation - mounting on track
a. Close the door.
b. Using a marker pen, mark the position of the top of the second door wheel from the
floor on the track.
c. Open the door and transfer this mark to the inside of the track.
d. Remove the drilling template label.
e. Place the Datum line on the template on top of the line marked inside the track.
f. Drill holes in the track using
15
/
64
in (6mm) and
15
/
32
in (12mm) drill bits.
g. Affix garage door lock
1
using two (2) M6 x 14 button head screws
14
.
h. Close the door and check the position of the lock to the wheel.
Proceed to Connecting Wireless Basestation to operator.
1
14
Preparation - mounting on door stile
a. Close the door.
b. Fit the mounting plate
2
to the garage door lock
1
using two (2) M6 x 12 cross recessed
screws
13
.
c. Determine mounting position of:
i. the bracket striker
3
, ensuring it aligns with slots in the track (as shown).
ii. the garage door lock
1
with mounting plate, on the top of the bottom panel of the door
stile,
iii. mark both positions and make sure the lock bolt engages fully into the bracket striker
3
.
d. Open door and affix the striker bracket
3
to the track, where marked, with 3 x Bolts
10
and
nuts
11
.
e. Close the door.
f. Place the lock with mounting plate onto position previously marked.
g. Align the lock
1
with the bracket striker
3
and make sure the lock bolt engages fully into
the bracket striker.
h. Affix the lock mounting plate to the door with four (4) Tek screws
12
.
13
1
2
10
11
12
Standard Installation
Limited Sideroom Installation
