background image

1

MK20HD PLUS / MK20W

English

Placement

●  This  device  may  interfere  with  radio  and 

television reception. Do not use this device in 

the vicinity of such receivers.

●  Noise  may  be  produced  if  wireless 

communications  devices,  such  as  cell 

phones,  are  operated  in  the  vicinity  of  this 

unit.  Such  noise  could  occur  when  receiving 

or initiating a call, or while conversing. Should 

you  experience  such  problems,  you  should 

relocate such wireless devices so they are at a 

greater distance from this unit, or switch them 

off.

●  Do not expose the unit to direct sunlight, place 

it near devices that radiate heat, leave it inside 

an enclosed vehicle, or otherwise subject it to 

temperature  extremes.  Excessive  heat  can 

deform or discolor the unit.

●  When  moved  from  one  location  to  another 

where the temperature and/or humidity is very 

different,  water  droplets  (condensation)  may 

form  inside  the  unit.  Damage  or  malfunction 

may result if you attempt to use the unit in this 

condition. Therefore, before using the unit, you 

must allow it to stand for several hours, until 

the condensation has completely evaporated.

●  Depending  on  the  material  and  temperature 

of the surface on which you place the unit, its 

rubber  feet  may  discolor  or  mar  the  surface. 

You can place a piece of felt or cloth under the 

rubber feet to prevent this from happening. If 

you do so, please make sure that the unit will 

not slip or move accidentally.

●  Do  not  put  anything  that  contains  water  on 

this  unit. Also,  avoid  the  use  of  insecticides, 

perfumes, alcohol, and nail polish, spray cans, 

etc., near the unit. Swiftly wipe away any liquid 

that  spills  on  the  unit  using  a  dry,  soft  cloth.

viewing  such  images  can  cause  headache, 

nausea,  or  other  discomfort.  Do  not  use  this 

unit  to  create  video  that  might  cause  these 

types of health problems. Asystems will accept 

no responsibility for any such health problems 

that may occur in yourself or in viewers.

IMPORTANT NOTES

Read First!

Prior  to  the  operation  of  this  unit,  please 

thoroughly  read  through  the  Owner’s  Manual 

in  its  entirety,  these  sections  provide  important 

and  comprehensive  information  concerning  the 

proper operation of this unit.
The Owner’s Manual should be saved and kept 

for future use and references.
The  digital  version  of  this  manual  is  available 

online at Asystems’ website for download.

Power Supply

●  Do  not  connect  this  unit  to  same  electrical 

outlet  that  is  being  used  by  an  electrical 

appliance  that  is  controlled  by  an  inverter 

or  a  motor  (such  as  a  refrigerator,  washing 

machine, microwave oven, or air conditioner).

  Depending on the way in which the electrical 

appliance  is  used,  power  supply  noise  may 

cause this unit to malfunction or may produce 

audible  noise.  If  it  is  not  practical  to  use  a 

separate  electrical  outlet,  connect  a  power 

supply  noise  filter  between  this  unit  and  the 

electrical outlet.

●  To prevent malfunction and equipment failure, 

always  make  sure  to  turn  off  the  power  on 

all  your  equipment  before  you  make  any 

connections.

●  Although the LCD and LEDs are switched off 

when the unit is turned off, this does not mean 

that the unit has been completely disconnected 

from the source of power. If you need to turn 

off the power completely, first turn off the unit’s 

switch,  then  unplug  the  power  cord  from  the 

power  outlet.  For  this  reason,  the  outlet  into 

which you choose to connect the power cord’s 

plug should be one that is within easy reach 

and readily accessible.

WARNING:

To  prevent  injury,  this  apparatus  must 

be  securely  attached  to  the  floor/wall  in 

accordance with the installation instructions.

WARNING:

Installation  should  only  be  performed  by 

qualified  installation  personnel.  Improper 

installation may result in the entire apparatus 

falling down and causing injury.

Содержание MK20HD PLUS





































Отзывы: