AsVIVA MVPB0010, Руководство пользователя

Страница: 38 / 39

38
BATTERY
How do I charge the Sensor Battery?
With your left hand, press down on the red tab located behind the Sensor, then gently slide out the battery
with your right hand. Insert the charging cable into a USB power source, then connect it to the battery‘s
micro USB slot.
How long do I have to charge the Sensor battery until it is full?
A full charge takes approximately 2 hours. The Sensor Battery LED lights up red while charging. The lights
turns off when it is fully charged.
How long can the battery last?
On a full charge, the sensor batter can last up to 6 hours of continous use. On standby, the sensor battery can
last for up to about one month.
Only charge your battery with the supplied charger. Never use a charger from another manufacturer.
Not even if the plugs of the charger fit your battery. The battery may heat up, ignite or explode in this case.
Make sure that the battery and the charger do not get damp or wet during the charging process to avoid
electric shocks.
Check the charge status if the battery is not used for more than two months and recharge it in between if
necessary.
If it is necessary to replace the battery or charger, please only use original spare parts. If other spare parts or
non-matching accessories are used, there is an increased risk of damage and malfunction. In such a case, any
warranty claim on the product will be voided.
Do not dispose of your battery in normal household waste. Observe the battery disposal law.
Please also observe any instructions on the corresponding sticker on the battery or charger.
Never open or repair the rechargeable battery. A battery with a damaged casing must no longer be used.
REPLACE THE BATTERY IMMEDIATELY.
Risk of short circuit, fire and explosion.