manualshive.com logo in svg

ASV VT-70, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
ASV VT-70 Скачать руководство пользователя страница 20

2.10 Fire Prevention

Compact Track loaders have components that operate at high temperatures. It is
important to observe all inspection, operation and maintenance guidelines to min-
imize the possibility of fire.

• 

Turn the engine off when refueling.

• 

When refueling or charging the battery, do not smoke or allow open flame 
near the machine.

• 

Always start the engine according to the procedure in the operating 
instructions.

•

Inspect and clean the radiator/oil cooler, engine compartment, exhaust 
system and other areas where there may be hot or rotating parts 

daily (or 

as needed)

. In some work environments, flammable debris including but 

not limited to: leaves, straw, wood particles (dust), and similar items can 
accumulate in these areas and can lead to fire.

• 

Check the electrical system regularly. Have any faults such as loose 
connections, burnt fuses, glow lamps and damaged wiring repaired by 
professional personnel immediately.

• 

Regularly check all lines, hoses and threaded couplings for leaks and 
damage. Repair leaks immediately and replace any defective parts. Oil leaks
can easily lead to a fire. 

NEVER use bare hands to check for hydraulic 

leaks! 

Pressurized fluid (oil) can penetrate skin and cause gangrene. If 

injection occurs, seek medical attention immediately!

• 

Do not use any starting aids containing ether to start diesel engines with 
pre-heat systems! Use of starting aids of this nature can cause an 
EXPLOSION!

• 

Familiarize yourself with the location of any fire extinguishers (if equipped) 
in/on the machine and how to use them as well as local options for 
reporting and fighting fires should one occur.

Fuel Handling Precautions
•

Do not smoke or allow open flame near fueling operations.

•

Always maintain control of the fuel filter nozzle when filling the tank.

•

Do not fill the fuel tank to capacity, allow room for expansion.

•

Clean up fuel spills immediately.

•

Tighten the fuel tank cap securely. Should the cap become lost or damaged,
replace it immediately with the original manufacturer’s recommended 
replacement cap to ensure proper venting and function.

•

Never use fuel for cleaning purposes.

•

Always use the correct fuel grade for the operating season and engine 
requirements.

18

2 SAFETY

VT-70 High Output US ISO O&M
0404-853   2019-09

Содержание VT-70



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды