ASV RT60-ROW Скачать руководство пользователя

Страница: 54 / 85

5.12 Operation on Inclines

By design, Compact Track Loaders are very stable on inclines. Machine weight is
distributed evenly throughout the chassis and the suspended undercarriage track
system provides excellent traction and floatation on nearly all surfaces.

5.13 Shut Down Procedure

Stop and lower any work attachments that may be coupled to
the machine.

Stop the machine in a safe location (on firm and level ground) where it is
protected from the elements and vandals.

Lower the lift arms until they rest on the frame stops.

Reduce engine RPM to a low idle.

Turn the ignition key counterclockwise to stop the engine, remove key.

Remove the seat belt and raise the lap bar.

Open the door (if equipped) and exit the machine using 3 points of contact
as described in the starting procedure in this section.

5 OPERATION

Even with these capabilities, extreme caution should always be exercised
while operating the machine on an incline. Avoid operation on steep

inclines. Do not make sudden changes in direction, move slowly, and always
carry loads low to maximize machine stability.

RT-60/R160T/R190T ROW O&M

0404-659 2016-05

https://tractormanualz.com/

Содержание RT60-ROW






















































































Результаты поиска

Содержание RT60-ROW

Отзывы:

Похожие инструкции для RT60-ROW

Бренды по названию

Популярные бренды

ASV RT60-ROW, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание RT60-ROW

Отзывы:

Похожие инструкции для RT60-ROW

Бренды по названию

Популярные бренды