15
Lift Arm Brace
When the lift arms must be left in the
raised position, install the lift arm brace
to ensure your safety.
To install:
1. Remove any attachments from the
machine, then park the machine on
flat, stable ground.
2. Have an assistant withdraw the
retaining pins from the lift arm brace
on the fender and remove the brace.
3. Raise the lift arms to the upper limit to
allow for brace installation.
4. Have the assistant place the lift arm
brace onto the top side of the cylinder
ram and install the retaining pins to
secure it there.
5. Slowly lower the lift arms until they
come to rest on the brace.
To remove:
1. Raise the lift arms until they are clear
of the brace.
2. Have an assistant remove the retain-
ing pins and remove the brace.
3. Lower the lift arms to the lower stop.
4. Position the lift arm brace over the
fender brackets as found and install
the retaining pins to secure it there.
M
MA
AC
CH
HIIN
NE
E O
OP
PE
ER
RA
AT
TIIO
ON
N
This procedure must be performed by two
people to ensure safety. Never place any
part of your body under unsecured lift arms
as personal injury or death could result!
WARNING
