manualshive.com logo in svg

ASV POSI-TRACK SR-70, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
ASV POSI-TRACK SR-70 Скачать руководство пользователя страница 22

Two Speed

The SR 80 is equipped with a
two speed drive system with low
and high range. 

•

Low range

is best suited to 

performing strenuous tasks or
running attachments. 

•

High range 

is intended 

primarily for transporting. 

To activate high range, press the
button on the front of the right
joystick. To return to low range,
press the button a second time. 

There is a high/low range indica-
tor light located in the instrument
display to confirm which range
you are operating in.

Note:

When shifting between

ranges, slow the machine down
to ensure a smooth transition.

Power Quick Attach 

The SR machines are available
with a power quick attach fea-
ture that allows the operator to
fasten and unfasten attachments
without exiting the machine.
(SR-80-standard/SR-70-optional) 

•

To lock the power quick 
attach, depress the rocker 
type switch located on the 
switch panel into the lock 
position.  

• To unlock the quick attach, 

move the switch to the unlock
position.

Note:

The power quick attach

switch is equipped with a locking
device. The device must be dis-
engaged in order to unlock the
quick attach. To disengage, slide
the locking device downward.
The switch can then be moved
into the unlocked position.

CONTROLS

Two Speed/Power Quick Attach

21

Содержание POSI-TRACK SR-70









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды