34
After powering on the NAS, you will be able to see the NAS name and IP address on the LCD panel. The panel will turn off
automatically after a few seconds. You can use the panel to configure settings and check system information.
The main menu consists of the following submenus:
1. 1 Touch Backup
2. Network
3. Storage
4. Temperature
5. Operation
6. Configuration
Press the [Up] or [Down] buttons to navigate through the menu items. Press the [Confirm] button to enter into any
submenu. Press the [Back] button to return to the previous level.
1. Touch Backup
In the 1 Touch Backup submenu, you can use the [Up], [Down] and [Confirm] buttons to select and execute the actions
below.
1.1.
Progress: Execute the backup function for the USB port located on the front panel.
1.2.
Eject Device: Eject any USB devices connected to the USB port located on the front panel.
2. Network
In the Network submenu you can use the [Up], [Down] and [Confirm] buttons to view the information listed below.
2.1. LAN
2.1.1
IP Address
2.1.2
Subnet Mask
2.2
WAN
1.
[Up]
Button
2.
[Down]
Button
3.
[Back]
Button
4.
[Confirm]
Button
