8
2.5-inch hard disks and SSD hard disks: Place the hard disk into the area of the disk tray outlined in red (see
picture below). Make sure that the mounting holes on the bottom of the hard disk and disk tray are lined up.
Secure the drive with four screws.
4.
Slide the disk tray onto the rails of the disk bay. Using the latch, gently push the disk tray all the way into the disk bay.
Secure the disk tray in place by pushing down on the latch. The latch should close easily and snap in with an audible
‘click’. Please make sure that the disk tray is pushed all the way into the disk bay before attempting to secure the
latch.
5.
Once the latch is secure, you can lock it in place using the disk tray lock. Using a flathead screwdriver, turn the lock
counterclockwise to lock the latch mechanism. Turning the lock clockwise will unlock it.
