28
Red
Steadily lit
Hard disk abnormality
Rear Panel
Operating the LCD Panel
You can use the LCD panel to configure system settings and check system information. The buttons located on
the right side of the LCD panel can be used to navigate through its menus. Please see the graphic below for a
description of each button.
After powering on the NAS, you will be able to see the NAS name and IP address on the LCD panel. The panel
will turn off automatically after a few seconds. You can use the panel to configure settings and check system
information.
The main menu consists of the following submenus:
1. 1 Touch Backup
1. USB 3.0 Type C Port
2. HDMI Port
3. USB 3.0 Port
4. RJ45 Port
5. S/PDIF Port
6. Reset Button
7. DC Input
8. K-lock
9. System Fan
1.
[Up]
Button
2.
[Down]
Button
3.
[Back]
Button
4.
[Confirm]
Button
