ASUSTOR NAS Memory Installation Guide
•
When inserting the memory module into the empty slot, please make sure to align the notches on
the module with the notches in the slot. Diagonally slide in the memory module (as shown in the
illustration) making sure that the memory module’s connectors are fully inserted into the slot.
Using two fingers, carefully push down and then back on the memory module until it clicks into
place. You should be able to hear an audible “click”.
2.3.
Replacing the Cover
•
Replace the cover and tighten the three screws that were removed previously.
•
Reconnect all cables including the power cord and then start up the NAS.
Page 8 of 10
