ASUSTeK COMPUTER WL-335G, Руководство пользователя

Страница: 5 / 39

1. Introduction
This document is the user manual for the SMC WTK-G product..
2. Quick Start
The default IP address of the WTK-G is 192.168.2.25. The login is “admin” and password is “smcadmin”.
1. Connect the SMC WTK-G to a PC using an ethernet cable.
2. Plug in the 5V power supply.
3. Make sure the PC has a IP address on the 192.168.2.xxx subnet, such as 192.168.2.100.
4. Open your web browser and navigate to 192.168.2.25.
5. Type “admin” for the login field and “smcadmin” for the password.
6. The default out-of-box operating mode is Access Point (AP) mode. To switch to Repeater, P2P,
PMP or Client mode, go to the Mode page and select the desired mode. Click Apply. The board will
reboot into the desired mode.
7. After the board reboots, go to the Mode page and click Setup. Configure the applicable properties
for that mode, such as security, SSID, channel, etc.
8. The SMC WTK-G should now be ready to use.
3. Operating Modes
3.1 Introduction to Operating Modes
3.1.1 Traveler’s AP Mode
The Access Point (AP) mode is by default the out-of-box operational mode. When the
user resets the system to the default manufacturing settings, the operational mode also
reverts to AP mode. In the AP mode, the system functions as a standard AP, where wireless
clients connected to the AP can then connect to other wireless clients or to the wired network.
For example, when traveling to a hotel that has high speed internet access, the user can
connect to the Internet through the AP which is connected to an ethernet cable in the room.