3-10
H310I-IM-A R3.0
3.3.11 USB Configuration
Legacy USB Support
[Enabled]
Enables the support for USB devices on legacy OS.
[Disabled]
USB devices are only available when running BIOS Setup.
[Auto]
Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
XHCI Hand-off
This item functions as a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by XHCI driver.
Configuration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support.
Configuration options: [Disabled] [Enabled]
LAN1_U31G1_E1
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
LAN1_U31G1_E2
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
LAN2_U31G1_E3
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
LAN2_U31G1_E4
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
U31G1_1(~2)
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
USB_5(~8)
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]