Asus Z97I-PLUS, Руководство пользователя

Страница: 29 / 146

ASUS Z97I-PLUS
1-15
Chapter 1
1.2.9 Internal connectors
1. Intel
®
Z97 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
®
Rapid Storage Technology through the onboard Intel
®
Z97
chipset.
• These connectors are set to [ AHCI ] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[ RAID ]. Refer to section 3.6.3 PCH Storage Configuration for details.
• Before creating a RAID set, refer to section 5.1 RAID configurations or the guide
bundled in the motherboard support DVD.
• When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI] . See section 3.6.3 PCH Storage Configuration for details.
Z97I-PLUS
A
B
A
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
B
SATA6G_4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXN4
RSATA_RXP4
GND
SATA6G_3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
Z97I-PLUS SATA 6.0Gb/s connectors
2. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
Z97I-PLUS
Z97I-PLUS Digital audio connector
SPDIF_OUT
+5V SPDIFOUT GND