Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, this item allows you to provide rapid protection when
the package power exceeds the Power Limit 1. Use the <+> or <‑> keys to adjust the
value. The values range from 1 W to 4096 W.
CPU Integrated VR Current Limit [Auto]
Allows you to set a higher current limit to prevent frequency and power throttling when
overclocking. Use the <+> or <‑> keys to adjust the value. The values range from
0.125 to 1023.875 with a 0.125 interval.
CPU Internal Power Switching Frequency
Frequency Tuning Mode [Auto]
This item allows you to increase or decrease the switching frequency of the internal
regulator. Decrease the switching frequency to reduce the power consumption or
increase the switching frequency to enhance voltage stability. When this item is set to
[+] or [‑], the Frequency Tuning Offset appears that allows you to set its value from 0%
to 6%.
CPU Internal Power Fault Control
Thermal Feedback [Auto]
Allows your system to take precautionary actions to protect the CPU when the thermal
condition of the external regulator exceeds the threshold. Configuration options: [Auto]
[Disabled] [Enabled]
CPU Integrated VR Fault Management [Auto]
Disable this item to prevent tripping the Fully Integrated Voltage Regulator when doing
over‑voltage. We recommend you to disable this item when overclocking. Configuration
options: [Auto] [Disabled] [Enabled]
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
This item allows you to improve the power rating when the CPU is in low power state,
or make the FIVR (fully integrated voltage regulator work in high performance at all
times. Configuration options: [Auto] [High Performance] [Balanced]
Power Decay Mode [Auto]
This item allows your system to improve the power saving mode on the Fully Integrated
Voltage Regulator as the processor goes into low current state. Configuration options:
[Auto] [Disabled] [Enabled]
Idle Power-in Response [Auto]
This item allows you to set the slew rate for the Fully Integrated Voltage Regulator
when it enters manual override mode. Configuration options: [Auto] [Regular] [Fast]
Idle Power-out Response [Auto]
This item allows you to set the slew rate for the Fully Integrated Voltage Regulator
when it exits manual override mode. Configuration options: [Auto] [Regular] [Fast]
2-24
Chapter 2: Getting started
Содержание Z97-K
Страница 1: ...Z97 K Motherboard ...
Страница 19: ...ASUS Z97 K 1 9 1 4 3 Installing a DIMM To install a DIMM 1 2 3 To remove a DIMM B A A ...
Страница 34: ...1 24 Chapter 1 Product introduction ...
Страница 86: ...2 52 Chapter 2 Getting started ...