Asus Z97-DELUXE Series Скачать руководство пользователя страница 77

Страница: 77 / 184

ASUS Z97-DELUXE Series

2-13

Chapter 2

•

Do not unplug portable disk, power system, or press the CLR_CMOS button while

BIOS update is ongoing, otherwise update will be interrupted. In case of interruption,

please follow the steps again.

•

If the light flashes for five seconds and turns into a solid light, this means that the

BIOS Flashback is not operating properly. This may be caused by improper installation

of the USB storage device and filename/file format error. If this scenario happens,

please restart the system to turn off the light.

•

Updating BIOS may have risks. If the BIOS program is damaged during the process

and results to the system’s failure to boot up, please contact your local ASUS Service

Center.

For more BIOS update utilities in BIOS setup, refer to the section

3.11 Updating BIOS

Chapter 3.

Wait until the light goes out, indicating that the BIOS updating process is completed.

Содержание Z97-DELUXE Series

























































































































































































Результаты поиска

Содержание Z97-DELUXE Series

Отзывы:

Бренды по названию

Популярные бренды

Asus Z97-DELUXE Series, Руководство пользователя

Результаты поиска

Содержание Z97-DELUXE Series

Отзывы:

Бренды по названию

Популярные бренды