
ASUS Z97-AR
1-27
1.7.2
Internal connectors
1.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
The COM module is purchased separately.
2. Intel
®
Z97 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1, SATA6G_2,
SATA6G_34, SATA6G_56, SATA Express)
This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
When using hot-plug and NCQ, set the
SATA Mode Selection
item in the BIOS to [AHCI].
See section
2.6.3 PCH Storage Configuration
for details.
Содержание Z97-AR
Страница 1: ...Motherboard Z97 AR ...
Страница 12: ...1 2 Chapter 1 Product introduction Place this side towards the rear of the chassis 1 2 3 Motherboard layout ...
Страница 15: ...ASUS Z97 AR 1 5 1 3 1 Installing the CPU ...
Страница 114: ...A 6 Appendices ...