Asus Z87-A, Руководство пользователя, Страница: 72 / 114

2-20
Chapter 2: BIOS information
2-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 2-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto] .
3-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 3-Core Limit value that must be higher than or equal to the 4-Core
Ratio Limit.
If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core
Ratio Limit to
[Auto] .
4-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 4-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, and 3-Core Ratio to
[Auto] .
2.5.4 Min. CPU Cache Ratio [Auto]
This item allows you to set the minimum possible ratio on the Uncore part of the processor.
Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed.
2.5.5 Max. CPU Cache Ratio [Auto]
This item allows you to set the maximum possible ratio on the Uncore part of the processor.
Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed.
2.5.6 Internal PLL Overvoltage [Auto]
This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the
extreme overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
2.5.7 CPU Ratio Tuner [Auto]
This item allows you to enhance the overclocking capability of non-K series CPUs.
Configuration options: [Auto] [Enabled] [Disabled]
2.5.8 BCLK Frequency: DRAM Frequency Ratio [Auto]
This item allows you to configure the setting of the BCLK frequency to DRAM frequency ratio.
[Auto]
The BCLK to DRAM frequency ratio is set to its optimized setting
[100:133] The BCLK frequency to DRAM frequency ratio is set to 100:133
[100:100] The BCLK frequency to DRAM frequency ratio is set to 100:100