2-1
Chapter 2: Setup
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW199 Series LED monitor is specially designed for
VESA wall mount.
To detach the arm/stand:
1. Remove the arm cover.
2. Have the front of the monitor face down on a table.
3.
Use a screwdriver to remove the three screws on the stand of the monitor as
the below drawing shows.
4. Detach the stand from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor when you remove the screws.
screws
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
