Regulatory notices
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we publish the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/
english/REACH.htm
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
ASUS Contact Information
ASUSTeK COMPUTER INC.
Address
4F, No. 150 Li-Te Road, Peitou, Taipei 112, Taiwan
Telephone
+886-2-2894-3447
Fax
+886-2-2890-7798
Website
http://www.asus.com
Technical Support
Telephone
+86-21-38429911
Fax
+86-21-58668722, ext. 9101#
Online support
http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address
800 Corporate Way, Fremont, CA 94539, USA
Telephone
+1-510-739-3777
Fax
+1-510-608-4555
Website
http://usa.asus.com
Technical Support
Support fax
+1-812-284-0883
General support
+1-812-282-4555
Online support
http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address
Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax
+49-2102-959931
Website
http://www.asus.com/de
Online contact
http://eu-rma.asus.com/sales
Technical Support
Telephone
+49-2102-5789555
Support Fax
+49-2102-959911
Online support
http://qr.asus.com/techserv
Safety information
Your VivoStick is designed and tested to meet the latest standards of safety
for information technology equipment. However, to ensure your safety, it is
important that you read the following safety instructions.
Setting up your system
•
Read and follow all instructions in the documentation before you
operate your system.
•
Do not use this product near water or a heated source.
•
Make sure you leave plenty of space around the system for ventilation.
•
Use this product in environments with ambient temperatures between
1˚C (33.8˚F) and 35˚C (95˚F).
•
If you use an extension cord, make sure that the total ampere rating
of the devices plugged into the extension cord does not exceed its
ampere rating.
•
This equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
•
If you notice any of the following conditions (or if you have other
safety concerns), do not use your device: crackling, hissing, popping
sound, or a strong odor or smoke coming from your device. It is normal
for these conditions to appear when an internal electronic component
fails in a safe and controlled manner. However, these conditions may
also indicate a potential safety issue. Do not assume that it is a safe
failure. Turn off your device. If your device is plugged in, disconnect it
from its power source, and contact technical support for assistance.
•
Magnet
: Avoid placing any media that contains magnets or is
sensitive to magnetism, such as credit cards, bank cards, audio/video,
tapes, or magnetic memory devices, near your device as you may
lose information stored on that media and devices may be severely
damaged. Media containing information sensitive to magnets should
be kept at least 5 cm away from your device.
•
Pacemakers and other implanted medical devices
: VivoStick
receives and transmits using Wi-Fi and Bluetooth technology, which
can interfere with pacemakers and other implanted medical devices. If
you have a pacemaker or other implanted medical device, contact your
physician or medical device manufacturer to make sure it’s okay to use
your VivoStick.
Care during use
•
Do not walk on the power cord or allow anything to rest on it.
•
Do not spill water or any other liquids on your system.
•
When the system is turned off, a small amount of electrical current still
flows. Always unplug the power cord from the power outlets before
cleaning the system.
•
If you encounter the following technical problems with the product,
unplug the power cord and contact a qualified service technician or
your retailer.
–The power cord or plug is damaged.
–Liquid has been spilled into the system.
– The system does not function properly even if you follow the
operating instructions.
– The system was dropped or the casing is damaged.
–The system performance changes.
DO NOT
throw the VivoStick in municipal waste. This
product has been designed to enable proper reuse
of parts and recycling. This symbol of the crossed out
wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button
cell battery) should not be placed in municipal waste.
Check local technical support services for product
recycling.
NO DISASSEMBLY
The warranty does not apply to the products that have been
disassembled by users.
Lithium-Metal Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name:
Asus Computer International
Address: 800 Corporate Way, Fremont
, CA 94539.
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name : VivoStick
Model Number : TS10
Conforms to the following specifications:
FCC Part 15, Subpart B, Unintentional Radiators
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Representative Person’s Name
:
Steve Chang / President
Signature :
Date :
Feb. 22, 2016
Ver. 140331
Federal Communications Commission
Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
This transmitter must not be co-located or
operated in conjunction with any other antenna or
transmitter. Any changes or modifications not expressly
approved by the grantee of this device could void the
user’s authority to operate the equipment.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle our products, batteries,
other components, as well as the packaging materials. Please go to
http://
csr.asus.com/english/Takeback.htm
for the detailed recycling information
in different regions.
Coating Notice
IMPORTANT!
To provide electrical insulation and
maintain electrical safety, a coating is applied to insulate
the device except on the areas where the I/O ports are
located.
ISED Radiation Exposure Statement for
Canada
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with ISED RF exposure
compliance requirements, please avoid direct contact to the transmitting
antenna during transmitting. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
Operation is subject to the following two conditions:
•
This device may not cause interference and
•
This device must accept any interference, including interference that
may cause undesired operation of the device.
Compliance Statement of Innovation,
Science and Economic Development
Canada (ISED)
This Class B digital apparatus complies with Canadian ICES-003, RSS-210, and
CAN ICES-3(B)/NMB-3(B).
This device complies with Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Déclaration de conformité de Innovation,
Sciences et Développement économique
Canada (ISED)
Cet appareil numérique de classe B est conforme aux normes canadiennes
ICES-003, RSS-210 et CAN ICES-3(B)/NMB-3(B).
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie
Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1)
cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit
accepter toute interférence, y compris celles susceptibles de provoquer un
fonctionnement non souhaité de l’appareil.
Regional notice for California
WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Wireless Operation Channel for Different
Domains
N. America
2.412-2.462 GHz Ch01 through CH11
Japan
2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
Regional notice for Singapore
This ASUS product complies with IMDA Standards.
Complies with
IMDA Standards
DB103778