background image

v i i

v i i

v i i

v i i

v i i

Safety information

Electrical safety

Electrical safety

Electrical safety

Electrical safety

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are
connected.

• If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safety

Operation safety

Operation safety

Operation safety

Operation safety

• Before installing devices into the system, carefully read all the

documentation that came with the package.

• Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet. Place the product on a
stable surface.

• If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

L i t h i u m - I o n   B a t t e r y   W a r n i n g

L i t h i u m - I o n   B a t t e r y   W a r n i n g

L i t h i u m - I o n   B a t t e r y   W a r n i n g

L i t h i u m - I o n   B a t t e r y   W a r n i n g

L i t h i u m - I o n   B a t t e r y   W a r n i n g

C A U T I O N

C A U T I O N

C A U T I O N

C A U T I O N

C A U T I O N: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturerís instructions.

V O R S I C H T

V O R S I C H T

V O R S I C H T

V O R S I C H T

V O R S I C H T: Explosionsgetahr bei unsachgemäßen Austausch der
Batterie. Ersatz nur durch denselben oder einem vom Hersteller
empfohlenem  ähnljchen Typ. Entsorgung gebrauchter Batterien nach
Angaben des Herstellers.

L A S E R   P R O D U C T   W A R N I N G

L A S E R   P R O D U C T   W A R N I N G

L A S E R   P R O D U C T   W A R N I N G

L A S E R   P R O D U C T   W A R N I N G

L A S E R   P R O D U C T   W A R N I N G

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

Содержание Vintage



























































































Отзывы: