Asus Vintage PE1, Руководство пользователя

Страница: 46 / 84

4 - 1 0 4 - 1 0
4 - 1 0 4 - 1 0 4 - 1 0
C h a p t e r 4 : M o t h e r b o a r d i n f o C h a p t e r 4 : M o t h e r b o a r d i n f o
C h a p t e r 4 : M o t h e r b o a r d i n f o C h a p t e r 4 : M o t h e r b o a r d i n f o C h a p t e r 4 : M o t h e r b o a r d i n f o
1 0 . 1 0 . 1 0 . 1 0 . 1 0 . Chassis intrusion connector (4-1 pin CHASSIS1) C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 ) C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 ) C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 ) C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 )
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
®
Chassis intrusion connector
CHASSIS1
+5VSB_MB Chassis Signal GND
(Default)
1 1 . 1 1 .
1 1 . 1 1 .
1 1 . S p e a k e r c o n n e c t o r ( 4 - p i n S P E A K E R 1 ) S p e a k e r c o n n e c t o r ( 4 - p i n S P E A K E R 1 )
S p e a k e r c o n n e c t o r ( 4 - p i n S P E A K E R 1 ) S p e a k e r c o n n e c t o r ( 4 - p i n S P E A K E R 1 )
S p e a k e r c o n n e c t o r ( 4 - p i n S P E A K E R 1 )
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
®
Speaker out connector
SPEAKER1
+5V
1
GND
Speak Out
GND