Asus V4-M3N8200 Скачать руководство пользователя страница 41

Страница: 41 / 104

3-3

ASUS V4-M3N8200

3.3

Support DVD information

The support DVD that came with the system contains useful software and several

utility drivers that enhance the system features.

3.3.1

Running the support DVD

To begin using the support DVD, place the DVD in your optical drive. The DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

• Screen display and options may not be the same for different operating

system versions.

•

The contents of the support DVD are subject to change at any time without

notice. Visit the ASUS website for updates.

If Autorun is NOT enabled in your computer, browse the contents of the

support DVD/DVD to locate the file

ASSETUP.EXE

from the BIN folder.

Double-click the

ASSETUP.EXE

to run the CD/DVD.

Click an item to install

Click an icon to

display support

DVD/DVD/

motherboard

information

Содержание V4-M3N8200









































































































Результаты поиска

Содержание V4-M3N8200

Отзывы:

Бренды по названию

Популярные бренды

Asus V4-M3N8200, Руководство по установке

Результаты поиска

Содержание V4-M3N8200

Отзывы:

Бренды по названию

Популярные бренды