Asus UP-895MD Series Скачать руководство пользователя страница 117

Страница: 117 / 180

ASUS Z97-PRO Series

3-39

Chapter 3

3.6.4

System Agent Configuration

CPU Display Audio [Enabled]

Enable this item for the CPU display audio support.
Configuration options: [Enabled] [Disabled]

DVI Port Audio [Off]

Enable this item to support audio output for certain DVI monitors.
Configuration options: [On] [Off]

Graphics Configuration

This item allows you to select a primary display from CPU and PCIe graphical devices.

Primary Display [Auto]

This item allows you to select the primary display from CPU and PCIe devices.
Configuration options: [Auto] [CPU Graphics] [PCIE]

CPU Graphics Memory [Auto]

This item allows you to empower both integrated and discrete graphics devices for the

multi-monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M]

[288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M]

Render Standby [Auto]

This item allows you to enable the Intel

Graphics Render Standby support to reduce

iGPU power when the system is idle.
Configuration options: [Auto] [Disabled] [Enabled]

CPU Graphics Multi-Monitor [Disabled]

This item allows you to enable the iGPU Multi-Monitor. The iGPU shared system

memory size is fixed 64 MB.
Configuration options: [Disabled] [Enabled]

DMI Configuration

This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.

DMI Gen 2 [Auto]

Set this item to

[Enabled]

to run DMI at PCI-E 2.0 speed.

Configuration options: [Enabled] [Disabled]

Содержание UP-895MD Series





















































































































































































Результаты поиска

Содержание UP-895MD Series

Отзывы:

Asus UP-895MD Series, Руководство пользователя, Страница: 117 / 180

Результаты поиска

Содержание UP-895MD Series

Отзывы: