manualshive.com logo in svg

Asus TX97-XE, Руководство пользователя

Поделиться
Скачать
Asus TX97-XE Скачать руководство пользователя страница 64

64

ASUS Audio User’s Manual

Win3.x Audio Drivers

W

in3.x Audio 

Drivers

Config. Manager

You will get the following message after you press <ENTER>:
Welcome to the Configuration Manager installation program.  This program installs
Configuration Manager files onto your computer’s hard disk.  Before installing,
please read the README file for the latest information.  If you need more informa-
tion before deciding on a certain option, you can always get help by pressing F1.

Press <ENTER> to continue, <F1> for help, <F2> for README, or <F3> to exit.

The following lines will be added to your system files:
C:\AUTOEXEC.BAT file:

SET CTCM=C:\CTCM

C:\CTCM\CTCU /S /W=C:\WINDOWS

C:\CONFIG.SYS file:

DEVICE=C:\CTCM\CTCM.EXE

Press <ENTER> to continue, <F1> for help, or <F3> to exit.

A message will appear on the next screen:
Software installation completed.

The following files were modified and its original saved with B~K extension.

C:\CONFIG.SYS

C:\AUTOEXEC.BAT

You must reboot in order for the newly edited CONFIG.SYS to be initiated.  You
may choose to exit to DOS by pressing <ENTER> but be sure to reboot on your
own.  A message “Please remember to REBOOT your system” will appear when
exiting.  Otherwise, press <F10> to automatically reboot your system.

Содержание TX97-XE









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды