Asus TS700-E9 Series, Руководство пользователя

Страница: 42 / 178

Chapter 2: Hardware Setup 2-18
2.6 5.25-inch or 3.5-inch drives
Ensure to unplug the power cable before installing or removing any system components.
Failure to do so may cause damage to the motherboard and other system components!
You must remove the front panel assembly before installing a 5.25-inch drive.
2.6.1 Installing a 5.25-inch drive
3. Connect the SATA cable to the SATA
connector on the back of the drive.
4. Connect the 4-pin power connector from the
power supply to the power connector on the
back of the drive.
The system comes with three 5.25-inch
drive bays located on the upper front part
of the chassis. An optical drive that comes
standard with the system package occupies
the uppermost bay (labeled 1). The lower bays
(labeled 2 and 3) are available for additional
5.25-inch drives or 5.25-inch to 3.5-inch hard
drive adapter for installing 3.5-inch zip or floppy
disk drives.
1. Unscrew and remove the metal cover
of the bay where you want to install the
5.25-inch drive.
2. Insert the drive into the bay and slide
the bay lock to the right until it clicks in
place.