ASUS TS700-E4/RX8
2-45
2.10.7 Roller wheels
To remove the chassis wheels:
1. Lay the system chassis on its side.
2. Use a Phillips screwdriver to remove
the screws that secure the wheels
to the bottom of the chassis.
3. Repeat step 2 to remove the other
three roller wheels.
Remove the chassis roller wheels if you wish to mount the system to a rack.
For convenient transport, install the roller wheels the came with the system
package. Each wheel has a brake lock to stabilize the chassis in place.
To install the chassis wheels:
1. Lay the chassis in its side.
2. Locate the designated screw holes
for each of the four wheel sets. Take
note of the numbers alongside each
hole when placing screws.
3. Secure each wheel to the bottom of
the chassis using four screws.
4. Repeat steps 2 and 3 to install the
other three wheels.
3
1
2
4
Содержание TS700-E4 - 0 MB RAM
