Asus STRIX H270F GAMING, Руководство пользователя, Страница: 82 / 113

3-30
Chapter 3: BIOS Setup
Chapter 3
Extension Fan 1/2/3 Profile [Standard]
This item allows you to set the appropriate performance level of the extension fan.
[Standard]
Sets to [Standard] to make the extension fan automatically adjust
depending on the chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet extension fan
operation.
[Turbo] Sets to [Turbo] to achieve maximum extension fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following items appear only when you set
Extension Fan 1/2/3 Profile
to [Manual].
Extension Fan 1/2/3 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the extension fan temperature.
The values range from 20°C to 75°C.
Extension Fan 1/2/3 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum extension fan duty cycle. The
values range from 60% to 100%. When the chassis temperature reaches the
upper limit, the extension fan will operate at the maximum duty cycle.
Extension Fan 1/2/3 Middle Temperature [45]
Use the <+> or <-> keys to set the value for Extension Fan Middle Temperature.
Extension Fan 1/2/3 Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the extension fan middle duty cycle. The values
range from 60% to 100%.
Extension Fan 1/2/3 Lower Temperature [40]
Use the <+> or <-> keys to adjust the extension fans’ lower temperature. The
values range from 0°C to 75°C.
Extension Fan 1/2/3 Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum extension fan duty cycle. The
values range from 60% to 100%. When the CPU temperature is under the lower
limit, the extension fan operates at the minimum duty cycle.
Allow Fan Stop
[Disabled]
Allows the fan to run at 0% duty cycle when the temperature of the source is
dropped below the lower temperature.
AIO PUMP Control [Disabled]
The subitems in this menu allows you to configure the AIO PUMP Control settings.
[PWM mode]
Enables the Q-Fan control feature in PWM mode for the 4-pin AIO pump
fan.
[DC mode] Enables the Q-Fan control feature in DC mode for the 3-pin AIO pump fan.
[Disabled] Disables the Q-Fan control feature.
The following items appear only when you set the AIO PUMP Control to [PWM Mode] or
[DC Mode] .
AIO PUMP Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the AIO pump fan temperature. The
values range from 25
º
C to 75
º
C.