background image

92

  the program under these conditions, and telling the user how 

to view a copy of this License. (Exception: if the Program itself is 

interactive but does not normally print such an announcement, 

your work based on the Program is not required to print an 

announcement.)

  These requirements apply to the modified work as a whole. 

If identifiable sections of that work are not derived from the 

Program, and can be reasonably considered independent and 

separate works in themselves, then this License, and its terms, 

do not apply to those sections when you distribute them as 

separate works. But when you distribute the same sections 

as part of a whole which is a work based on the Program, the 

distribution of the whole must be on the terms of this License, 

whose permissions for other licensees extend to the entire 

whole, and thus to each and every part regardless of who 

wrote it.

  Thus, it is not the intent of this section to claim rights or contest 

your rights to work written entirely by you; rather, the intent is 

to exercise the right to control the distribution of derivative or 

collective works based on the Program.

  In addition, mere aggregation of another work not based on 

the Program with the Program (or with a work based on the 

Program) on a volume of a storage or distribution medium 

does not bring the other work under the scope of this License.

3.  You may copy and distribute the Program (or a work based on 

it, under Section 2) in object code or executable form under the 

terms of Sections 1 and 2 above provided that you also do one 

of the following:

  a)  Accompany it with the complete corresponding machine-

readable source code, which must be distributed under the 

terms of Sections 1 and 2 above on a medium customarily used 

for software interchange; or,

  b)  Accompany it with a written offer, valid for at least three 

years, to give any third party, for a charge no more than your 

Содержание RT1901






































































































Отзывы: