67
4.6.2 System
The
System
page allows you to configure your wireless router
settings.
To set up the System settings:
1. From the navigation panel, go to
Advanced Settings
>
Administration
>
System
tab.
2. You can configure the following settings:
•
Change router login password
: You can change the
password and login name for the wireless router by entering
a new name and password.
•
WPS button behavior
: The physical WPS button on the
wireless router can be used to activate WPS or switch off
wireless networking.
•
Time Zone
: Select the time zone for your network.
•
NTP Server
: The wireless router can access a NTP (Network
time Protocol) server in order to synchronize the time.
•
Enable Telnet
: Click
Yes
to enable Telnet services on the
network. Click
No
to disable Telnet.
•
Authentication Method
: You can select HTTP, HTTPS, or
both protocols to secure router access.
•
Enable Web Access from WAN
: Select
Yes
to allow devices
outside the network to access the wireless router GUI
settings. Select
No
to prevent access.
•
Only allow specific IP
: Click
Yes
if you want to specify the IP
addresses of devices that are allowed access to the wireless
router GUI settings from WAN.
•
Client List
: Enter the WAN IP addresses of networking
devices allowed to access the wireless router settings. This
list will be used if you clicked
Yes
in the
Only allow specific
IP
item.
3. Click
Apply
.
