background image

5-8

Chapter 5: BIOS setup

5.2.3 

Menu items

The highlighted item on the menu bar displays the specific items for that menu. For 

example, selecting 

Main

 shows the Main menu items.

The other items (Event Logs, Advanced, Monitor, Boot, Tool, and Exit) on the menu 

bar have their respective menu items.

5.2.4 

Submenu items

A solid triangle before each item on any menu screen means that the item has a 

submenu. To display the submenu, select the item then press <Enter>.

5.2.5 

Navigation keys

At the bottom right corner of a menu screen are the navigation keys for the BIOS 

setup program. Use the navigation keys to select items in the menu and change 

the settings.

5.2.6 

General help

At the top right corner of the menu screen is a brief description of the selected item.

5.2.7 

Configuration fields

These fields show the values for the menu items. If an item is user-configurable, 

you can change the value of the field opposite the item. You cannot select an item 

that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To 

change the value of a field, select it and press <Enter> to display a list of options.

5.2.8 

Pop-up window

Select a menu item and press <Enter> to display a pop-up window with the 

configuration options for that item.

5.2.9 

Scroll bar

A scroll bar appears on the right side of a menu screen when there are items that 

do not fit on the screen. Press the Up/Down arrow keys or <Page Up> /<Page 

Down> keys to display the other items on the screen.

Содержание RS920-E7/RS8









































































































































































































Отзывы: