Asus RS720Q-E8-RS12, Руководство пользователя

Страница: 48 / 196

Chapter 2: Hardware information 2-22
2.7.2 Power supply module
To install a second power supply module
• If you install two or more nodes, please install both the power supply modules.
• The system automatically combines the two power supply modules as a single one.
The combined output power varies with input voltages. Refer to the table below for
details:
Input Voltage Max. Output Power (Watt) per PSU
100–120Vac, 12–10A, 50–60Hz 1000W
120–140Vac, 12–10A, 50–60Hz 1200W
180–240Vac, 10.5–8A, 50–60Hz 1620W
• To enable the hot-swap feature (redundant mode), keep the total power consumption
of the installed nodes under the maximum output power of an individual power supply
module.
• For steady power input, use only the power cables that come with the server system
package.
1. Press and hold the latch on the dummy
cover and pull out the cover from the
server chassis.
Ensure to remove the plastic cover
before installing the module.
2. Take out the second power supply
module from its package. Firmly push
the power supply module into the
chassis until the latch locks to the
server chassis.