Asus RS700-E7/RS8, Руководство пользователя

Страница: 95 / 194

ASUS RS700-E7/RS8 5-31
USB Hardware Delays and Time-outs
USB transfer time-out [20 sec]
The time-out value for control, bulk, and interrupt transfer.
Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]
Device reset time-out [20 sec]
USB mass storage device start unit command time-out.
Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]
Device power-up delay [Auto]
Maximum time the device will take before it property reports itself to the Host
Controller. ‘Auto’ uses default valus: for a Root port it is 100ms, for a Hub port the
delay is taken from Hub descriptor. Configuration options: [Auto] [Manual]
The following item appears only when you set Device power-up delay to
[Manual].
Mass Storage Devices:
AMI Virtual CDROM0 1.00 [Auto]
Mass storage device emulation type ‘Auto’ enumerates devices are emilated as
‘CDROM’, drivers with no media will be emulated according to a drive type.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]
AMI Virtual Floppy0 1.00 [Auto]
Mass storage device emulation type ‘Auto’ enumerates devices are emilated as
‘CDROM’, drivers with no media will be emulated according to a drive type.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]
AMI Virtual HDISK0 1.00 [Auto]
Mass storage device emulation type ‘Auto’ enumerates devices are emilated as
‘CDROM’, drivers with no media will be emulated according to a drive type.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]