Asus RS100-E10-PI2 Скачать руководство пользователя страница 25

Страница: 25 / 166

2-7

ASUS RS100-E10-PI2

Close the load plate (A), ensuring that

the front edge of the load plate slides

under the retention lock (B) then push

down the load lever (C).

Insert the load lever under the retention

tab to remove the PnP cap from the

CPU socket.

Apply some Thermal Interface Material

to the exposed area of the CPU that

the heatsink will come in contact with,

ensuring that it is evenly spread in a thin

layer.

Skip this step if the heatsink comes

with pre-applied Thermal Interface

Material.

The Thermal Interface Material is

toxic and inedible. DO NOT eat it. If

it gets into your eyes or touches your

skin, wash it off immediately and seek

professional medical help.

Retention

lock

Load lever

Retention tab

Load lever

Содержание RS100-E10-PI2







































































































































































Результаты поиска

Содержание RS100-E10-PI2

Отзывы:

Asus RS100-E10-PI2, Руководство пользователя, Страница: 25 / 166

Результаты поиска

Содержание RS100-E10-PI2

Отзывы: