6
ENGLISH
Frequently Asked Questions
Q1: What should I do if my router does not support WPS?
• You can use Method Two to set up RP-AC55.
Q2: Why is it that the LED indicator for the current network does not light up after the Wi-Fi setup is
complete?
• You may have entered the wrong password for the router/AP. Please restart your RP-AC55, enter the correct password, and try to
set up your RP-AC55 again.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser?
• Ensure that your computer is connected to your RP-AC55 network only, and set your computer to
Obtain an IP address au-
tomatically
. If you still cannot find the login page, please download the ASUS Device Discovery utility. You can download the
utility for Windows and Mac from
https://www.asus.com/Networking/RP-AC55/HelpDesk_Download/
.
Q4: How do I reset RP-AC55?
• Press the RESET button on the side of RP-AC55 for about two (2) seconds. Wait for about five (5) seconds until the existing net
-
work LED blinks slowly.
Q5: I cannot access the web GUI to configure the RP-AC55 settings.
• Close all running web browsers and launch again.
• Follow the steps below to configure your computer settings based on its
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click
Start
>
Internet Explorer
to launch the web browser.
2. Click
Tools
>
Internet options
>
Connections
tab >
LAN settings
.
3. From the Local Area Network (LAN) Settings screen, untick
Use a proxy server for your LAN
.
4. Click
OK
when done.
U14322_RP-AC55_QSG_V3.indb 6
2018/5/22 18:10:00