Asus ROG STRIX X570-E GAMING, Руководство пользователя

Страница: 24 / 94

1-10
Chapter 1: Product Introduction
Chapter 1
5. Q-Code LED
The Q-Code LED design provides you with a 2-digit error code that displays the system
status. Refer to the Q-Code table on the next page for details.
STRIX X570-e GAMING
ROG STRIX X570-E GAMING Q-Code LED
1.1.7 Headers
1. Clear RTC RAM jumper (2-pin CLRTC)
This jumper allows you to clear the CMOS RTC RAM data of the system setup
information such as date, time, and system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the < Del > key during the boot process and enter BIOS setup to re-enter
data.
If the steps above do not help, remove the onboard battery and short the two pins again to
clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
STRIX X570-e GAMING
ROG STRIX X570-E GAMING Clear RTC RAM
CLRTC
+3V_BAT GND
PIN 1