Asus ROG STRIX B360-H GAMING Скачать руководство пользователя страница 25

Страница: 25 / 74

ROG STRIX B360-H GAMING

1-13

Chapter 1

The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum
power rating of 3A (12V), and no longer than 3 m.

Before you install or remove any component, ensure that the ATX power supply is switched

off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.

•

Actual lighting and color will vary with LED strip.

•

If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip is connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

•

The LED strip will only light up when the system is operating.

•

The LED strip is purchased separately.

AURA RGB headers (4-pin RGB_HEADER)

This connector is for RGB LED strips.

ROG STRIX B360-H GAMING RGB_HEADER connector

PIN 1

+12V G R B

RGB_HEADER

STRIX B360-H GAMING

Содержание ROG STRIX B360-H GAMING











































































Результаты поиска

Содержание ROG STRIX B360-H GAMING

Отзывы:

Бренды по названию

Популярные бренды

Asus ROG STRIX B360-H GAMING, Руководство пользователя

Результаты поиска

Содержание ROG STRIX B360-H GAMING

Отзывы:

Бренды по названию

Популярные бренды