ASUS Q170T
1-3
System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
Embedded DisplayPort (40-pin EDP)
This connector is for an internal embedded DisplayPort connection.
LVDS connector (40-pin LVDS)
This connector is for an LCD monitor that supports Low-voltage Differential
Signaling (LVDS) interface.
LVDS panel/eDP selector (3-pin FPD_SEL)
Pins
Setting
1-2 (Default)
LVDS
2-3
eDP
LCD panel backlight header (8-pin LCD_BLKT_PANEL)
This connector is for the LCD panel backlight and brightness controls. It enables
the LCD panel backlight, provides backlight control signals, and provides brightness
control signals for the brightness button on the front panel.
Backlight inverter voltage selection header (3-pin BLKT_PWR_SEL)
USB 2.0 connectors (10-1 pin USB78, 10-2 pin USB910; 5-1 pin USB11)
Connect the USB module cable to these connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors comply with
USB 2.0 specifications and support up to 480Mbps connection speed.
Intel
®
LGA1151 CPU socket
Install Intel
®
LGA1151 CPU into this surface mount LGA1151 socket, which is
designed for 6th Generation Intel
®
Core™ i7 / i5 / i3, Pentium
®
, and Celeron
®
processors
For more details, refer to
Central Processing Unit (CPU)
.
Chassis intrusion header (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this connector.
The chassis intrusion sensor or switch sends a high-level signal to this connector
when a chassis component is removed or replaced. The signal is then generated as
a chassis intrusion event.
The chassis intrusion detection feature is disabled by default. To enable it, set the
Chassis Intrude Detect Support
item in the BIOS to [
On
].
1
2
2
3
12V
(Default)
19V
BLKT_PWR_SEL
Pins
Setting
1-2 (Default)
12V
2-3
19V
1
2
2
3
for LVDS
(Default)
for eDP
FPD_SEL
Содержание Q170T
Страница 1: ...Motherboard Q170T ...
