2-14
Chapter 2: RAID configuration
Deleting an array
• You cannot recover lost data if you delete an array. Make sure you back up
important data before deleting an array.
• If you delete an IM (RAID 1) volume, the data is preserved on the primary
disk.
To delete an array:
1. Follow steps 1~2 of the section
Viewing volume properties
.
2. From the screen, press <F2> to select <Activate Array>.
3. Press <Y> to delete, or <N> to cancel.
Esc=Abort/Exit ArrowKeys=Select Item -/+ =Change [Item]
Home/End =Select Item Enter=Execute <Item>
F2 =Menu
RAID Properties Array: IM SCSI ID: 8 Size(MB): 70008
SCSI Device Identifier Array Hot Status Predict Size
ID Disk? Spare Failure (MB)
8 FUJITSU MAT3073NC 0107 Yes No Primary No 70008
9 FUJITSU MAT3073NC 0107 Yes No Out of Sync No 70008
10 FUJITSU MAT3073NC 0107 --- Yes
Ok No 70008
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IME-5.10.03
<Next Array>
<Delete Array>
<Add/Delete Hot Spare>
<Activate Array>
